Danby 4.4cu ft SS @ Costco

AllanMar · Post by **AllanMar** » Sun Dec 30, 2012 2:32 pm

$25 off ($124.99) I have one fits 2 ball lock and 5lb co2 nicely

Post by **Jimmy** » Sun Dec 30, 2012 2:36 pm

AllanMar wrote:$25 off ($124.99) I have one fits 2 ball lock and 5lb co2 nicely

I've got the Whirlpool version (identical except for the tag), and use 2 ball & 5lb as well.

Post by **mr x** » Sun Dec 30, 2012 2:43 pm

nice price

AllanMar · Post by **AllanMar** » Sun Dec 30, 2012 4:56 pm

As a quick word of warning to anyone who may be interested in these. Danby changed the design at some point and the door panel no longer just unscrews, it is molded/spray foamed in place so you have to cut it apart (not a big deal, but slightly less clean looking)

HappyTractor · Post by **HappyTractor** » Sun Dec 30, 2012 5:45 pm

Sounds like a good deal, but I don't see it online. In store only is it ?

Thanks !

AllanMar · Post by **AllanMar** » Sun Dec 30, 2012 6:00 pm

Pretty sure yea. I seen it this morning at the Dartmouth Costco.

Jimmy M · Post by **Jimmy M** » Mon Dec 31, 2012 1:53 pm

Does it still have room left with your ball locks inside? I need one that will fit two pinlocks.

AllanMar · Post by **AllanMar** » Mon Dec 31, 2012 2:09 pm

Jimmy M wrote:Does it still have room left with your ball locks inside? I need one that will fit two pinlocks.

I doubt it. I've been meaning to have a closer look though as I'm interested in some of the 2.5gal kegs OBK has, and they're also 9" diameter.

Post by **Jimmy** » Mon Dec 31, 2012 2:12 pm

Jimmy M wrote:Does it still have room left with your ball locks inside? I need one that will fit two pinlocks.

Mine is pretty tight with the 2 ball lock kegs, not sure if you'd fit 2 pin lock. Maybe if they were offset a bit instead of directly side-by-side.

Jimmy M · Post by **Jimmy M** » Mon Dec 31, 2012 2:17 pm

Good price tho, almost worth grabbing anyway.

Jimmy M · Post by **Jimmy M** » Mon Dec 31, 2012 5:45 pm

Jimmy wrote:
Jimmy M wrote:Does it still have room left with your ball locks inside? I need one that will fit two pinlocks.
Mine is pretty tight with the 2 ball lock kegs, not sure if you'd fit 2 pin lock. Maybe if they were offset a bit instead of directly side-by-side.

The kenmore 4.9 you have is from sears right? I can't find anything online that big with out a freezer.

Post by **Jimmy** » Mon Dec 31, 2012 5:50 pm

Jimmy M wrote:
Jimmy wrote:
Jimmy M wrote:Does it still have room left with your ball locks inside? I need one that will fit two pinlocks.
Mine is pretty tight with the 2 ball lock kegs, not sure if you'd fit 2 pin lock. Maybe if they were offset a bit instead of directly side-by-side.

The kenmore 4.9 you have is from sears right? I can't find anything online that big with out a freezer.

Yeah, Kenmore Elite. That's probably bigger than you need though.

chicanuck · Post by **chicanuck** » Thu Jan 03, 2013 2:37 pm

Just picked one up today at the Dartmouth Cost-co, they have 13 left at $125. I bought the same one about a year ago for $160. It is true about the door as it is adhered on pretty good, with the old model I was able to unscrew the inside door plastic and replace with cardboard. Any suggestions on how to cleanly remove the necessary plastic without making a huge mess? I am thinking of using a dremel tool with a cutting wheel and then taping the exposed area, it will probably still look like a happy harry special.

- chicanuck

AllanMar · Post by **AllanMar** » Thu Jan 03, 2013 8:55 pm

ImageUploadedByTapatalk1357257188.568540.jpg

That's what I did. On the old style I was able to unscrew the door and replaced it with an old whiteboard, was nice for writing stuff on. I intended to clean this one up somehow but I doubt I'll bother now.

I used one of those multi-tools which was very easy, dremel would work but probably be painful.

ImageUploadedByTapatalk1357257316.652763.jpg

sharpie · Post by **sharpie** » Fri Jan 04, 2013 11:06 am

FYI I picked one up yesterday but was told today is the last day for the sale.

AllanMar · Post by **AllanMar** » Tue May 28, 2013 4:12 pm

FYI, It's back on.

http://www.costco.ca/warehouse-instant-savings-nt.html" onclick="window.open(this.href);return false;

$159.99 Regular - $30 Discount , $129.99 on sale.

Tons at Dartmouth Crossing Costco (there at the end of an aisle, not where they usually are).

jason.loxton · Post by **jason.loxton** » Tue May 28, 2013 5:08 pm

Says $179 reg, $149 with sale online: http://www.costco.ca/Danby%C2%AE-DAR125 ... 47872.html" onclick="window.open(this.href);return false;

AllanMar · Post by **AllanMar** » Tue May 28, 2013 5:50 pm

Costco online is almost always more as the price includes shipping. It is defiantly $159-$30 in store.

jason.loxton · Post by **jason.loxton** » Wed May 29, 2013 9:35 am

Ah. Cool! Good to know.

Post by **mr x** » Wed May 29, 2013 12:01 pm

What's the smallest size shanks that you can use with this?

TimG · Post by **TimG** » Thu Jun 06, 2013 4:27 pm

Anybody able to confirm pin lock fitment?

X, you're thinking shanks through the doors?

Tim

Post by **mr x** » Thu Jun 06, 2013 6:09 pm

Definitely. Have the fridge and gear, just need time to uncrate the fridge.

Sent from Tapatalk 2, a prick of a company.

Post by **LeafMan66_67** » Thu Jun 06, 2013 6:14 pm

mr x wrote:Definitely. Have the fridge and gear, just need time to uncrate the fridge.

Sent from Tapatalk 2, a prick of a company.

Not a hell of a lot of room for shanks with the two ball lock kegs in place.

Post by **mr x** » Thu Jun 06, 2013 7:09 pm

I've got shanks in the mini fridge I bought from CT. It's tight, but it goes.

Sent from Tapatalk 2, a prick of a company.

Danby 4.4cu ft SS @ Costco

Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Re: Danby 4.4cu ft SS @ Costco

Who is online