Perlick 525 leak
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Perlick 525 leak
Oh boy, yet another brewing disaster!
My perlicks always, from time to time, drip a little. No biggie, just open and shut again and it would usually stop. But what happened a few days ago is no little drip. I came home from work to my house smelling like a brewery. I ran down stairs to find almost a full keg of APA on the floor and one of my taps leaking from #7 on the attached diagram. I took the tap apart and could find nothing wrong with any of the o-rings. I put some keg lube on both #2 o-rings and now no leak. I am however to scared to leave any of my kegs hooked up when I'm not at home. Anyone else have this issue? If so what was the fix? I have found some info online that suggests that perlick recalled some of there taps because of similar leaks and i have emailed keg connection to notify them of my issue.
My perlicks always, from time to time, drip a little. No biggie, just open and shut again and it would usually stop. But what happened a few days ago is no little drip. I came home from work to my house smelling like a brewery. I ran down stairs to find almost a full keg of APA on the floor and one of my taps leaking from #7 on the attached diagram. I took the tap apart and could find nothing wrong with any of the o-rings. I put some keg lube on both #2 o-rings and now no leak. I am however to scared to leave any of my kegs hooked up when I'm not at home. Anyone else have this issue? If so what was the fix? I have found some info online that suggests that perlick recalled some of there taps because of similar leaks and i have emailed keg connection to notify them of my issue.
You do not have the required permissions to view the files attached to this post.
- mr x
- Mod Award Winner
- Posts: 13764
- Joined: Fri Sep 24, 2010 5:30 pm
- Location: Halifax/New Glasgow
Re: Perlick 525 leak
Never had an issue here...bummer about the beer and the mess.
At Alexander Keith's we follow the recipes first developed by the great brewmaster to the absolute letter.
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
yeah it was a big mess. Im lucky though because the keg wasn't completely empty, and at the speed it was leaking out, i know that it didn't sit on the laminate floor for long. Only minimal damage to the floor and baseboards.
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
I contacted kegconnection about this problem and they have since contacted perlick and they are sending me a new faucet. To me, this is perlick admitting to a flaw in the design or manufacturing process and therefor i think they should replace all three seeing as they were purchased at the same time and are of the same model. I emailed them explaining this and am waiting for a reply. Wish me luck.
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
also, perlick stated that the problem comes from over tightening item #7, thus distorting the o-ring causing the leak. If this was the case, why would they send me a new faucet and not just a new o-ring?
- mr x
- Mod Award Winner
- Posts: 13764
- Joined: Fri Sep 24, 2010 5:30 pm
- Location: Halifax/New Glasgow
Re: Perlick 525 leak
Customer relations.
Sent from my Nexus S using Tapatalk 2
Sent from my Nexus S using Tapatalk 2
At Alexander Keith's we follow the recipes first developed by the great brewmaster to the absolute letter.
- RubberToe
- Award Winner 13
- Posts: 3743
- Joined: Mon Mar 14, 2011 9:47 am
- Name: Rob
- Location: Dartmouth
- Contact:
Re: Perlick 525 leak
I've been having problems with one of my perlick's leaking lately too. After checking it out I found it was because #7 was too loose in my case, or o-ring not seated correctly. Hopefully I didn't tighten it down too much to compensate.
Electric Brewery Build
On tap at RubberToe's:
Sometimes on a Sunday Belgian Dubbel, Oaked Old Ale, Ordinary Bitter
On tap at RubberToe's:
Sometimes on a Sunday Belgian Dubbel, Oaked Old Ale, Ordinary Bitter
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
If your having trouble you should contact perlick. I just email for some help and they put a faucet in the mail the same day. Didn't even have to return the old one. I'm still working on getting the other two replaced as well.
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
well got my replacement today and I'm pissed. 23 dollars duty. Opened the box and its a 525ss and 525pc like the rest of my taps. Anyways, as i fight with perlick to get my 23 bucks back im trying to figure out what im going to do here. Do i replace my other two taps with the SS versions? do i replace the all the o-rings in my old taps and keep the SS for another project down the road? hmmmm. Suggestions anyone? Anyone here know of a good place to get replacement o-ring for my old taps?
Last edited by mattvincent24 on Sat Jun 08, 2013 11:52 pm, edited 1 time in total.
- mr x
- Mod Award Winner
- Posts: 13764
- Joined: Fri Sep 24, 2010 5:30 pm
- Location: Halifax/New Glasgow
Re: Perlick 525 leak
ALWAYS demand USPS when getting things shipped across the border.
I'm not touching mine until Iose a keg, lol.
I'm not touching mine until Iose a keg, lol.
At Alexander Keith's we follow the recipes first developed by the great brewmaster to the absolute letter.
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
thats the stupid thing about this..... I never send anything across the boarder unless it's USPS. I've been burned too many times. But in this case, perlick sent me the tap with out me even knowing! It was already in the mail before i knew what the F@#% was going on. Anyways, all said and done i got a 525SS for 23 bucks.. not a bad deal. I just don't know what to do with it. I guess i could have bigger problems...lol
- mr x
- Mod Award Winner
- Posts: 13764
- Joined: Fri Sep 24, 2010 5:30 pm
- Location: Halifax/New Glasgow
Re: Perlick 525 leak
sonofabitch, didn't I just pour a beer out of my 575 and blew foam out through that top gasket.
What did you do to contact them about this?
What did you do to contact them about this?
At Alexander Keith's we follow the recipes first developed by the great brewmaster to the absolute letter.
- RubberToe
- Award Winner 13
- Posts: 3743
- Joined: Mon Mar 14, 2011 9:47 am
- Name: Rob
- Location: Dartmouth
- Contact:
Re: Perlick 525 leak
Mine leaked again too. I just finished lubing both of the #2 o-rings, hopefully it will be ok now. I was careful not to tighten #7 down hard.
Electric Brewery Build
On tap at RubberToe's:
Sometimes on a Sunday Belgian Dubbel, Oaked Old Ale, Ordinary Bitter
On tap at RubberToe's:
Sometimes on a Sunday Belgian Dubbel, Oaked Old Ale, Ordinary Bitter
- mr x
- Mod Award Winner
- Posts: 13764
- Joined: Fri Sep 24, 2010 5:30 pm
- Location: Halifax/New Glasgow
Re: Perlick 525 leak
I wonder if they used cheap o-rings.
Edit: Stopped wondering.
Edit: Stopped wondering.
At Alexander Keith's we follow the recipes first developed by the great brewmaster to the absolute letter.
-
- Verified User
- Posts: 972
- Joined: Wed Jan 12, 2011 2:44 pm
- Name: Jason Loxton
- Location: sydney ns
Re: Perlick 525 leak
Just got a new tower from OBK with two Perkicks. One of them has a slight drip when I turn it off. Is there anything I should be doing proactively?
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
mr x wrote:sonofabitch, didn't I just pour a beer out of my 575 and blew foam out through that top gasket.
What did you do to contact them about this?
I just emailed kegconnection, who i purchased the faucet through. They did the rest. I didn't contact perlick directly but i did see all the email traffic. I had another one leak yesterday. Im going to buy all new o-rings as soon as I find a good place to get them. You can buy from perlick directly but they only ship UPS and shipping in not cheap. Maybe a group buy could be in order.
PS unhook that faucet from you keg if you haven't already done so because it will leak again and if your not around when it happens......
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
I havent found anything that stops this except for cleaning it. But yours are new so that doesnt really help. What ever you do don't put keg lube on the big o-ring. While it may stop the leak it also kills head retention. I cleaned all the of mine one day because of dripping and i put a little keg lube on all the o-rings. After pulling a couple pints i had to pulled them all apart again to remove the lube.jason.loxton wrote:Just got a new tower from OBK with two Perkicks. One of them has a slight drip when I turn it off. Is there anything I should be doing proactively?
- Jimmy
- Site Admin Award Winner
- Posts: 6984
- Joined: Wed Sep 22, 2010 6:35 pm
- Location: Halifax, NS
Re: Perlick 525 leak
mother fawk. I've got a leaky perlick now. It's leaking out of the faucet though, not # 7.
- RubberToe
- Award Winner 13
- Posts: 3743
- Joined: Mon Mar 14, 2011 9:47 am
- Name: Rob
- Location: Dartmouth
- Contact:
Re: Perlick 525 leak
Jimmy how long have you had that one? Do you ever run pbw/oxyclean through it?
Sent from the brew timer.
Sent from the brew timer.
Electric Brewery Build
On tap at RubberToe's:
Sometimes on a Sunday Belgian Dubbel, Oaked Old Ale, Ordinary Bitter
On tap at RubberToe's:
Sometimes on a Sunday Belgian Dubbel, Oaked Old Ale, Ordinary Bitter
- Jimmy
- Site Admin Award Winner
- Posts: 6984
- Joined: Wed Sep 22, 2010 6:35 pm
- Location: Halifax, NS
Re: Perlick 525 leak
About a year now. I've cleaned it a few times....not as much as I should be though.RubberToe wrote:Jimmy how long have you had that one? Do you ever run pbw/oxyclean through it?
Sent from the brew timer.
- mr x
- Mod Award Winner
- Posts: 13764
- Joined: Fri Sep 24, 2010 5:30 pm
- Location: Halifax/New Glasgow
Re: Perlick 525 leak
Might just be a bit of hops, etc. stuck on the seal.
At Alexander Keith's we follow the recipes first developed by the great brewmaster to the absolute letter.
- Jimmy
- Site Admin Award Winner
- Posts: 6984
- Joined: Wed Sep 22, 2010 6:35 pm
- Location: Halifax, NS
Re: Perlick 525 leak
Most likely. I've been running Keith's IPA through there, so it's probably jammed full of hops.
-
- Verified User
- Posts: 1414
- Joined: Sun Feb 13, 2011 10:38 am
- Name: Tim Gallant
- Location: Kingston, ON
Re: Perlick 525 leak
Hmm.. I dont' want to drop $200 on 3 perlick setups if they're going to leak!
Jimmy, let us know if you figure it out.
Jimmy, let us know if you figure it out.
-
- Moderator
- Posts: 5603
- Joined: Thu Sep 23, 2010 4:17 pm
- Name: Chris
- Location: Halifax / On The Road Again
- Contact:
Re: Perlick 525 leak
None of my 5 leak. But i understand your hesitancy.
Co-author of Atlantic Canada Beer Blog
-
- Verified User
- Posts: 135
- Joined: Mon Jun 25, 2012 8:10 pm
Re: Perlick 525 leak
If anyone is looking for perlick parts, i am making an order through perlick so if you want something just post it in the group buy post that i started. For anyone that is interested, i am replacing parts #5 and #6 with the new style. I have one tap now that has the new style and it seems to close better.
Who is online
Users browsing this forum: No registered users and 13 guests