LF: Taps/shanks/Connectors & Temp Controller

[GillettBreweryCnslt]

Hey Everyone,

In an amazing turn of events we got a new freezer this weekend, leaving our 7 Cu. Ft. chest freezer available for a keezer conversion (it's amazing cause it wasn't on our radar at all, but things just fell into place)

So I'm 3 taps/shanks short of my soon to be 5-keg keezer. I'm also looking for a temp controller (if anyone got one from the ebay buy and doesn't need it). Of course I could also use 3 more gas/beer line sets (ball-lock) for the upgrade. Before I go buy new ones I thought I'd check around here. Let me know. Thanks

EDIT:
I've found the taps/shanks (Thanks Downs) and controller (Thanks Stusbrews).

I'm still looking for 3 sets of ball lock connecters, gas line, beer line, SS gas line splitters and 2 x 1/4" locknuts (just throwing that out there!)

Thanks

Dave

[GAM]

I still have this 4 tap. It may fit on top of your freezer.

http://www.brewnosers.org/forums/viewto ... f=6&t=1422" onclick="window.open(this.href);return false;

Sandy

[Downs]

hmmm maybe there is some three way action we can get going on here
i am in the process of moving my keezer from collar into a bar
i could use the 4 tap tower that is for sure
with that being done i would then have 3 taps and shanks up to pass on
i also have a spare regulator in my "extras" pile

[GAM]

I think it was $175 delivered. I started to clean it up yesterday.

Let me know.

Sandy

[Stusbrews]

I have a spare stc unit (I ordered 2) if its any help. Just the unit tho, not built. Its the 0.3 diff model.

[GillettBreweryCnslt]

Downs, I'm in for this deal - are your taps perlicks or the standard stainless steel? And when you say regulator, do you mean temp controller?

Stu - Depending on Downs response, I'll be interest in the controller.

[GAM]

Mike

You can even get your growler back.

I also still have a bunch of Pepsi taps if anyone feels the need.

Sandy

[Downs]

ok so they are not perlick just regular stainless
1 is brand new not even used
and i did mean regulator
was just throwing that out there to make sure the deal was even

so i guess Sandy wants 175 for the tower
how close to that can u get me for the 3 taps and shanks?
assuming you dont need the regulator

[Downs]

PS Sandy what did you think of that raspberry wheat i gave you?

[GillettBreweryCnslt]

ok so they are not perlick just regular stainless
1 is brand new not even used
and i did mean regulator
was just throwing that out there to make sure the deal was even

so i guess Sandy wants 175 for the tower
how close to that can u get me for the 3 taps and shanks?
assuming you dont need the regulator

Well, I can get 3 faucet/shank kits from OBK for $100. How bout $70 for the 3?

[GillettBreweryCnslt]

I have a spare stc unit (I ordered 2) if its any help. Just the unit tho, not built. Its the 0.3 diff model.

I'll take it. let me know the details. Thanks

[Downs]

how about 75
then its an even hundred for me to come up with for sandy

[GillettBreweryCnslt]

Sure, sounds good to me. I like it when everyone wins.

[GAM]

PS Sandy what did you think of that raspberry wheat i gave you?

It was nice and clean tasting. Wife and her friend liked it as well. If I make one I think I would lower the hops and let the razz pop a bit.

Sandy

[Downs]

ok so ill take the two out of the collar now
and we can arrange to do that deal
i am in lower sackville

sandy once that deal is done ill pick up the tower if that is cool?

[GAM]

I am not in a hurry to get the money if you need to wait for payday or something.

You can have the tower at you convience. I'd like to see it gone. I'll keep cleaning it up.

Sandy

[GillettBreweryCnslt]

I've found the taps/shanks (Thanks Downs) and controller (Thanks Stusbrews).

I'm still looking for 3 sets of ball lock connecters, gas line, beer line, SS gas line splitters and 2 x 1/4" locknuts (just throwing that out there!)

Thanks

Dave

[Downs]

Sandy, no i just dont have the bar built around the keezer yet
but i can grab it off you this weekend if you like?

[GAM]

Sandy, no i just dont have the bar built around the keezer yet
but i can grab it off you this weekend if you like?

Sounds good.

Sandy

[Dirt Chicken]

on this topic, I wanted to order 2 perlics and 2 elbow shanks to fit my towers, I hope to sometimes have cider on one tower - so stainless shanks would be preference over crome-plated brass. Anyone have any ideas?