Brewnosers Gear Update & Question

know1 · Post by **know1** » Wed Jun 13, 2012 11:42 am

XmonikerX wrote:I think i missed this..... Did i get a shirt? if so who do i owe $$ too?

If not, is there going to be another order?

Thanks,

Dave

I have a shirt for you, $14.30
PM to arrange pickup

jeffsmith · Post by **jeffsmith** » Wed Jun 13, 2012 12:03 pm

Brewnoser wrote:The embroidery place will do work on your own stuff - shirts, jackets, leather gear, hats - anything they can get two sides clear (not pockets unless you want the pocket stitched shut.

The cost for more than 20 items at once is around $6, whereas if you go in alone with one to three items it's a bit over $12.

Soooo.....

If anyone has something they want an embroidered logo on, let me know, get it to me, and when we reach the $6 threshold I'll take care of it.

I have three things myself.

And if you have questions about what can be done and what can't either PM or email me.

Jeff

Is this the same place that Jeramy had the work done? Just want to be sure that we have the same version of the logo on all our stuff since there were quite a few changes made to the logo before it went to production for this run of clothing.

know1 · Post by **know1** » Wed Jun 13, 2012 2:51 pm

Yes it is.

And here's their wholesale product supplier lineup too if anyone it looking for anything specific: http://www.advancedscreenprinting.co/en/products.html

Keep in mind their pricing is typically better than the list price on the supplier sites.

canuck · Post by **canuck** » Wed Jun 13, 2012 3:21 pm

Perhaps I missed it somewhere in this thread (and forgive me if I did), but is there Brewnoser ball caps being made or is it t-shirts and hoodies only? I'd love to pick up a Brewnoser ball cap.

jeffsmith · Post by **jeffsmith** » Wed Jun 13, 2012 3:42 pm

canuck wrote:Perhaps I missed it somewhere in this thread (and forgive me if I did), but is there Brewnoser ball caps being made or is it t-shirts and hoodies only? I'd love to pick up a Brewnoser ball cap.

Jimmy posted a file in one of the other threads that you can take into any Lids location and have a ball cap embroidered. Jeramy also had a run of them done with the company that we got all our clothing through.

The reason we went the Lids route (for some of us) was that we preferred the Flexfit brand hats specifically.

canuck · Post by **canuck** » Wed Jun 13, 2012 3:57 pm

jeffsmith wrote:
canuck wrote:Perhaps I missed it somewhere in this thread (and forgive me if I did), but is there Brewnoser ball caps being made or is it t-shirts and hoodies only? I'd love to pick up a Brewnoser ball cap.
Jimmy posted a file in one of the other threads that you can take into any Lids location and have a ball cap embroidered. Jeramy also had a run of them done with the company that we got all our clothing through.

The reason we went the Lids route (for some of us) was that we preferred the Flexfit brand hats specifically.

Gotcha, thanks Jeff.

I'll take a look at some of the other threads and see if I can find the file.

canuck · Post by **canuck** » Wed Jun 13, 2012 5:46 pm

I just called Lids in Saint John. From what the guy said, it cost's $50 to have the image digitized and another $15 to have it embroidered. And of course, the cost of the hat. Damn, that's pretty steep!!!

jeffsmith · Post by **jeffsmith** » Wed Jun 13, 2012 6:12 pm

canuck wrote:I just called Lids in Saint John. From what the guy said, it cost's $50 to have the image digitized and another $15 to have it embroidered. And of course, the cost of the hat. Damn, that's pretty steep!!!

The file that I sent you was what Jimmy got from Lids in Halifax after it was digitized. So it's just the hat + embroidery you have to worry about.

canuck · Post by **canuck** » Wed Jun 13, 2012 6:16 pm

jeffsmith wrote:
canuck wrote:I just called Lids in Saint John. From what the guy said, it cost's $50 to have the image digitized and another $15 to have it embroidered. And of course, the cost of the hat. Damn, that's pretty steep!!!
The file that I sent you was what Jimmy got from Lids in Halifax after it was digitized. So it's just the hat + embroidery you have to worry about.

That's exactly what I told him Jeff, and he insisted that the file still had to be sent off to be digitized. I was like WTF? I chalked it up to someone that didn't know what he was talking about. lol I am heading into SJ tomorrow as I need to get some propane at Costco for Friday's brewing session so I'll stop in there as well and see if I can get it done.

GAM · Post by **GAM** » Wed Jun 13, 2012 6:46 pm

canuck wrote:Perhaps I missed it somewhere in this thread (and forgive me if I did), but is there Brewnoser ball caps being made or is it t-shirts and hoodies only? I'd love to pick up a Brewnoser ball cap.

I have a small hat form the buy. I dont like th fit.

I can send it with Kyle.

Sandy

Brewnoser · Post by **Brewnoser** » Wed Jun 13, 2012 7:41 pm

The Lids option sounds good. But if you just buy a hat you like we can include it in a 20 us drop off to Advanced on Strawberry Hill and have it embroidered for $6.

jeffsmith · Post by **jeffsmith** » Wed Jun 13, 2012 8:09 pm

canuck wrote:
jeffsmith wrote:
canuck wrote:I just called Lids in Saint John. From what the guy said, it cost's $50 to have the image digitized and another $15 to have it embroidered. And of course, the cost of the hat. Damn, that's pretty steep!!!
The file that I sent you was what Jimmy got from Lids in Halifax after it was digitized. So it's just the hat + embroidery you have to worry about.
That's exactly what I told him Jeff, and he insisted that the file still had to be sent off to be digitized. I was like WTF? I chalked it up to someone that didn't know what he was talking about. lol I am heading into SJ tomorrow as I need to get some propane at Costco for Friday's brewing session so I'll stop in there as well and see if I can get it done.

If worse comes to worse, let me know the style and size you want and I can grab you one in Moncton.

canuck · Post by **canuck** » Thu Jun 14, 2012 10:29 am

GAM wrote:
canuck wrote:Perhaps I missed it somewhere in this thread (and forgive me if I did), but is there Brewnoser ball caps being made or is it t-shirts and hoodies only? I'd love to pick up a Brewnoser ball cap.
I have a small hat form the buy. I dont like th fit.

I can send it with Kyle.

Sandy

Ok great, thanks Sandy!

GAM · Post by **GAM** » Thu Jun 14, 2012 6:27 pm

canuck wrote:
GAM wrote:
canuck wrote:Perhaps I missed it somewhere in this thread (and forgive me if I did), but is there Brewnoser ball caps being made or is it t-shirts and hoodies only? I'd love to pick up a Brewnoser ball cap.
I have a small hat form the buy. I dont like th fit.

I can send it with Kyle.

Sandy
Ok great, thanks Sandy!

Kyle

Whats good for you?

I am off, and running around tomorrow with a B-bay party in the late pm.

I could drop it in a mail box.

Sandy

KMcK · Post by **KMcK** » Thu Jun 14, 2012 6:31 pm

GAM wrote:Kyle

Whats good for you?

I am off, and running around tomorrow with a B-bay party in the late pm.

I could drop it in a mail box.

Sandy

Tonight would be best. We're leaving at 1:00 tomorrow. Bring cards if you have any.

GAM · Post by **GAM** » Thu Jun 14, 2012 6:33 pm

Can not happen.

I am parent for a party of 12, 13 year old girls (OH sweet Jesus)

Sorry.

Sandy

KMcK · Post by **KMcK** » Thu Jun 14, 2012 6:38 pm

Leave it in your mailbox and maybe we can pick it up on the way.

GAM · Post by **GAM** » Thu Jun 14, 2012 7:16 pm

I don't have one. I can drop by 9:00 ish and leave it in a bag at your place.

Is anyone going with you?

Sandy

Post by **chalmers** » Thu Jun 14, 2012 7:19 pm

KMcK wrote:Leave it in your mailbox and maybe we can pick it up on the way.

On your way out of town, you could pick up some stickers and cards from me, and pay the $3 you owe for the sticker. I will be around at noon or 1.

canuck · Post by **canuck** » Fri Jun 22, 2012 3:30 pm

I got my Brewnosers hat made today at Lids in Saint John. A little disappointed that the colour is off on the hops on each side. The guy had no issues doing it over again, but I didn't have the time to wait another 40 mins or so for it. I also could of picked it up later, but I live close to 30 mins outside of Saint John and am rarely in there since I work from home. It doesn't look bad, just not like the original logo is all.

Post by **mr x** » Fri Jun 22, 2012 3:34 pm

Looks good to me. I actually like those colors.

jeffsmith · Post by **jeffsmith** » Fri Jun 22, 2012 5:20 pm

Hmmm, I wonder why they're changing the colours? The orange used on the glass doesn't look right either…

Post by **Jimmy** » Fri Jun 22, 2012 5:49 pm

I'd pick out the colors before the stitch it..however, that color combo doesn't look bad.

Brewnoser · Post by **Brewnoser** » Sat Jun 23, 2012 2:43 pm

Agreed. In the white hat, especially, it looks great. Btw I asked at Lids in HSC and they will put it on anything you bring in for $12.

They only do heavy duty fabric like hats though. Not t shirts. Shirts. Etc.

But as I stated earlier, the company Jeramy dealt with originally will do them for about $6 if we bring in 20 items.

Post by **mr x** » Sat Jun 23, 2012 2:44 pm

Yeah, I've so busy I haven't figured out what I want yet, but I'm still interested....I'll try to get some time in on this.