(Sold) Keg setup for sale

benwedge · Post by **benwedge** » Wed Jul 15, 2015 3:22 pm

Sadly the time has come to sell all of my homebrew stuff. I haven't made the time to brew in quite some time and my gear is cumbersome to move all of the time. I'd love to help folks brew on their systems if opportunities arise, but for now I'm at the end of the line.

First up: my keg setup. I'm selling a mini fridge, three kegs, a 5# CO2, and some random hoses. I've recently cleaned all of the kegs, but I'm out of CO2 so I couldn't test if they need gaskets. Two of the kegs are clearly pictured below, one not so much. They are all ball lock. The fridge fits two kegs at a time, plus the CO2 tank. There are some hoses and party taps, and two CO2 lines.

I'm asking $250 for this and would prefer to sell it all at once. PM me if you're interested.

IMG_2787.JPG

IMG_2786.JPG

IMG_2788.JPG

Keith · Post by **Keith** » Wed Jul 15, 2015 3:55 pm

Sent a msg to my buddy on the full setup to see if he wants it. $250 for everything?

Fridge, 3 Pepsi, Co2 tank, regulator lines, etc?

Keith · Post by **Keith** » Wed Jul 15, 2015 5:09 pm

He's wondering if you'd take $225 for the setup Ben.

Hobbitfu · Post by **Hobbitfu** » Thu Jul 16, 2015 8:32 am

Has the inside of the mini fridge been modified? I have the exact same fridge.

benwedge · Post by **benwedge** » Thu Jul 16, 2015 8:55 am

Hobbitfu wrote:Has the inside of the mini fridge been modified? I have the exact same fridge.

No, all I did was strip out the shelf and replace it with a coroplast (or similar) panel to keep heat from leaking out the edges.

Hobbitfu · Post by **Hobbitfu** » Thu Jul 16, 2015 8:57 am

So 2 kegs fit in even with all the plastic molded can slots in the door?

BAbrewing · Post by **BAbrewing** » Fri Jul 17, 2015 3:24 pm

Ill take it off your hands....

If you will deliver

benwedge · Post by **benwedge** » Fri Jul 17, 2015 3:53 pm

Hobbitfu wrote:So 2 kegs fit in even with all the plastic molded can slots in the door?

No, I mean I took the shelf thing off the door and replaced it with coroplast.

Hobbitfu · Post by **Hobbitfu** » Fri Jul 17, 2015 4:06 pm

Ahhh that makes sense! May have to try that when I start kegging. Do the kegs fit in front of the compressor hump no problem?

benwedge · Post by **benwedge** » Fri Jul 17, 2015 4:58 pm

Hobbitfu wrote:Ahhh that makes sense! May have to try that when I start kegging. Do the kegs fit in front of the compressor hump no problem?

Basically. You have to make sure to push the door shut though, as it's a tight fit.

CorneliusAlphonse · Post by **CorneliusAlphonse** » Fri Jul 17, 2015 5:06 pm

i have the same fridge, i shaved down the shelf holder things on the sides and it made everything fit really easily. looks awful though.

Keith · Post by **Keith** » Wed Jul 22, 2015 9:24 am

My buddy is kicking himself for trying to get it for $225. I told him it was a great buy and wouldn't last.

(Sold) Keg setup for sale

(Sold) Keg setup for sale

Re: Keg setup for sale

Re: Keg setup for sale

Re: Keg setup for sale

Re: Keg setup for sale

Re: Keg setup for sale

Re: Keg setup for sale

Re: Keg setup for sale

Re: (Sold) Keg setup for sale

Re: (Sold) Keg setup for sale

Re: (Sold) Keg setup for sale

Re: (Sold) Keg setup for sale

Who is online