Page 1 of 1
(Sold) Keg setup for sale
Posted: Wed Jul 15, 2015 3:22 pm
by benwedge
Sadly the time has come to sell all of my homebrew stuff. I haven't made the time to brew in quite some time and my gear is cumbersome to move all of the time. I'd love to help folks brew on their systems if opportunities arise, but for now I'm at the end of the line.
First up: my keg setup. I'm selling a mini fridge, three kegs, a 5# CO2, and some random hoses. I've recently cleaned all of the kegs, but I'm out of CO2 so I couldn't test if they need gaskets. Two of the kegs are clearly pictured below, one not so much. They are all ball lock. The fridge fits two kegs at a time, plus the CO2 tank. There are some hoses and party taps, and two CO2 lines.
I'm asking $250 for this and would prefer to sell it all at once. PM me if you're interested.
IMG_2787.JPG
IMG_2786.JPG
IMG_2788.JPG
Re: Keg setup for sale
Posted: Wed Jul 15, 2015 3:55 pm
by Keith
Sent a msg to my buddy on the full setup to see if he wants it. $250 for everything?
Fridge, 3 Pepsi, Co2 tank, regulator lines, etc?
Re: Keg setup for sale
Posted: Wed Jul 15, 2015 5:09 pm
by Keith
He's wondering if you'd take $225 for the setup Ben.
Re: Keg setup for sale
Posted: Thu Jul 16, 2015 8:32 am
by Hobbitfu
Has the inside of the mini fridge been modified? I have the exact same fridge.
Re: Keg setup for sale
Posted: Thu Jul 16, 2015 8:55 am
by benwedge
Hobbitfu wrote:Has the inside of the mini fridge been modified? I have the exact same fridge.
No, all I did was strip out the shelf and replace it with a coroplast (or similar) panel to keep heat from leaking out the edges.
Re: Keg setup for sale
Posted: Thu Jul 16, 2015 8:57 am
by Hobbitfu
So 2 kegs fit in even with all the plastic molded can slots in the door?
Re: Keg setup for sale
Posted: Fri Jul 17, 2015 3:24 pm
by BAbrewing
Ill take it off your hands....
If you will deliver
Re: Keg setup for sale
Posted: Fri Jul 17, 2015 3:53 pm
by benwedge
Hobbitfu wrote:So 2 kegs fit in even with all the plastic molded can slots in the door?
No, I mean I took the shelf thing off the door and replaced it with coroplast.
Re: (Sold) Keg setup for sale
Posted: Fri Jul 17, 2015 4:06 pm
by Hobbitfu
Ahhh that makes sense! May have to try that when I start kegging. Do the kegs fit in front of the compressor hump no problem?
Re: (Sold) Keg setup for sale
Posted: Fri Jul 17, 2015 4:58 pm
by benwedge
Hobbitfu wrote:Ahhh that makes sense! May have to try that when I start kegging. Do the kegs fit in front of the compressor hump no problem?
Basically. You have to make sure to push the door shut though, as it's a tight fit.
Re: (Sold) Keg setup for sale
Posted: Fri Jul 17, 2015 5:06 pm
by CorneliusAlphonse
i have the same fridge, i shaved down the shelf holder things on the sides and it made everything fit really easily. looks awful though.
Re: (Sold) Keg setup for sale
Posted: Wed Jul 22, 2015 9:24 am
by Keith
My buddy is kicking himself for trying to get it for $225. I told him it was a great buy and wouldn't last.