Page 1 of 1
1/2" Type K Soft Copper Tubing
Posted: Thu Mar 12, 2015 2:25 pm
by bluenose
I want to make a 1/2" inside 1" counter flow chiller and started buying the materials today. I could only buy the 1/2"type K soft copper tubing in a 66' roll. I don't need all that, so I'm going to keep 22' and sell the other 44'.
I'm just looking to get what I paid for it:
2 x 22' lengths = $55 each
1 x 44' length = $110
EDIT 2: It's 1/2" ID, not OD
EDIT: There's a good chance I'm heading to HRM this weekend if it helps.
Re: 1/2" Type K Soft Copper Tubing
Posted: Thu Mar 12, 2015 4:17 pm
by jtmwhyte
I'll take that 44'
Re: 1/2" Type K Soft Copper Tubing
Posted: Thu Mar 12, 2015 4:27 pm
by mr x
How are you going to deal with the 1"? Hose I am assuming....
Re: 1/2" Type K Soft Copper Tubing
Posted: Thu Mar 12, 2015 9:27 pm
by jtmwhyte
jtmwhyte wrote:I'll take that 44'
On second thought I'll pass
Re: 1/2" Type K Soft Copper Tubing
Posted: Thu Mar 12, 2015 11:25 pm
by bluenose
mr x wrote:How are you going to deal with the 1"? Hose I am assuming....
yes hose... though I may end up returning this 1/2" ID if noone else wants any and I'll cut up my 1/2" OD immersion chiller to make a counterflow chiller
pictures coming in a second
Re: 1/2" Type K Soft Copper Tubing
Posted: Fri Mar 13, 2015 6:50 am
by jtmwhyte
You do know the fittings I had are 3/8, right?
Re: 1/2" Type K Soft Copper Tubing
Posted: Fri Mar 13, 2015 7:17 am
by bluenose
jtmwhyte wrote:You do know the fittings I had are 3/8, right?
yup, I'm not planning to use them
Re: 1/2" Type K Soft Copper Tubing
Posted: Fri Mar 13, 2015 11:28 am
by bluenose
Ok, here's pictures:
20150312_230735.jpg
20150312_230549.jpg
20150312_230637.jpg