Looking for two tap handles

sucanushie · Post by **sucanushie** » Thu Jul 10, 2014 10:30 am

Anyone have a couple tap handles around they want to part with?

Looking for something that I can paint with chalkboard paint to put what is on each tap.

GAM · Post by **GAM** » Thu Jul 10, 2014 10:45 am

Hockey pucks work.

Sandy

gm- · Post by **gm-** » Thu Jul 10, 2014 11:35 am

These are decent for $11. You can remove the steelback stickers and paint with blackboard paint.
http://www.ontariobeerkegs.com/Steelbac ... handle.htm

Here they are on mine, I have since replaced the stickers with my own.

sucanushie · Post by **sucanushie** » Thu Jul 10, 2014 11:46 am

I have those on the Keezer

jacinthebox · Post by **jacinthebox** » Thu Jul 10, 2014 12:55 pm

I have two you can have...maybe you can paint them with chalkboard paint?

They are the one on the bottom, and top left.

sucanushie · Post by **sucanushie** » Thu Jul 10, 2014 1:06 pm

Those would be perfect!

jacinthebox · Post by **jacinthebox** » Thu Jul 10, 2014 1:12 pm

you may be able to see in the pic, the tall handle doesnt have a ferrule...you can get one, or just drill the handle out and screw in an insert (which I can give you if you wanted to do that).

where ya at?

Curtis_E_Bare · Post by **Curtis_E_Bare** » Thu Jul 10, 2014 1:13 pm

I have the Steelback ones as well. Unfortunately they are too tall and thick to work on a keggerator, the taps don't close.

Sent from my Nexus 5 using Tapatalk

sucanushie · Post by **sucanushie** » Thu Jul 10, 2014 1:23 pm

I had to make modifications to my keezer for them to fit...

keezer.JPG

jtmwhyte · Post by **jtmwhyte** » Thu Jul 10, 2014 3:51 pm

GAM wrote:Hockey pucks work.

Sandy

He's not kidding! I'd never spend money on tap handles

GAM · Post by **GAM** » Fri Jul 11, 2014 8:19 am

Paint a puck with BB paint and your good. I used a reflective tape and erasable marker.

Sandy

Woody · Post by **Woody** » Sat Jul 12, 2014 8:28 am

Great thread and ideas I never thought of! Brewnoser Ingenuity. Fucking brilliant. Really like seeing pics of others keezers/kegerators.

Keith · Post by **Keith** » Sun Jul 13, 2014 7:58 am

Since you like seeing others ideas. I'm sure you have seen it. But how I label my taps.

Woody · Post by **Woody** » Sun Jul 13, 2014 9:30 am

Sweet Keith. I have seen pics of famous Stanley. Nice set up. I only have 2 taps and I don't mark what is on each but I need to start. Some creative ideas around here. Here is a pic of my kegerator. A quick cell pic. Decorated by my daughter.

Keith · Post by **Keith** » Sun Jul 13, 2014 3:07 pm

I let Samantha use washable markers on Stanley. She gets a blank slate every now and then. Wouldn't change it. Seems like she has fun on yours as well.

Woody · Post by **Woody** » Sun Jul 13, 2014 3:59 pm

Keith wrote:I let Samantha use washable markers on Stanley. She gets a blank slate every now and then. Wouldn't change it. Seems like she has fun on yours as well.

She is 2 and definitely does. I'm sure the time will come for tap locks. I like the large fridge idea or freezer. Room for more kegs and a larger CO2 tank. I think I would do allot more double batches to keep the kegs filled. When my kegerator dies I'll make the switch.

Keith · Post by **Keith** » Sun Jul 13, 2014 9:06 pm

Sell and reinvest.

Looking for two tap handles

Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Re: Looking for two tap handles

Who is online