Hey everyone.
I have a Barley Crusher that seems to be worn out. The free spinning roller does not catch grain to pull through the two-roller gap. I've replaced this mill with a new one but kept this to see if I could fix it. I cleaned up the bushings that had malt powder debris caked on so it now all spins freely. The adjustable roller set screws were seized so I drilled them out and re-tapped them. Still, the mill does not grip grain. One thing I noticed is that when I put it together backwards the first time I had to spin it counter clockwise and it worked ok. Then I reassembled it so it was back to normal clockwise rotation and it stopped gripping, telling me that the knurled roller is likely worn down in one direction.
All that being said, I'm giving it away for free to whomever wants it. You can likely flip it upside down and run it backwards to get the reverse rolling gripping like I noted above. I'm just done with it and want it out of my basement. Free to whomever wants it. Comes with hopper, manual removable crank handle and MDF stand to fit over a bucket - standard issue with the Barley Crusher (at least at the time I purchased it).
Barley "Barely" crusher
- John G
- Award Winner 2
- Posts: 651
- Joined: Fri Sep 24, 2010 4:34 pm
- Name: John
- Location: North End Halifax
- McGruff
- Registered User
- Posts: 626
- Joined: Wed Feb 29, 2012 8:46 am
- Name: Chris Storey
- Location: Cavan, Ontario
Re: Barley "Barely" crusher
My Valley Mill does the same thing. I bought it in 2003.
- amartin
- Award Winner 8
- Posts: 1759
- Joined: Fri May 20, 2011 12:49 pm
- Location: Hammonds Plains
Re: Barley "Barely" crusher
Mine is like that too, although maybe not to the same extent. I bought it in 2011, but for a while I was probably brewing 20-25 gallons per month. It still works, but I run everything through it twice, once at 0.042” just to break it up and make it easier to grab, then again at 0.030”.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- KMcK
- Award Winner 1
- Posts: 2342
- Joined: Thu Oct 14, 2010 9:54 pm
- Name: Kyle
- Location: Halifax, Nova Soctia
Re: Barley "Barely" crusher
I'm in need of some parts to fix mine so I'll take this.
If I ever want to make a Tenet beer this will be perfect.
McKeggerator:
- no beer
-
- Verified User
- Posts: 19
- Joined: Sat Apr 06, 2019 4:42 pm
- Name: Bill Neklia
Re: Barley "Barely" crusher
I am interested in trying to MacGyver it to get it working. Will send you a PM
- John G
- Award Winner 2
- Posts: 651
- Joined: Fri Sep 24, 2010 4:34 pm
- Name: John
- Location: North End Halifax
Re: Barley "Barely" crusher
Looks like Kyle was first in line. - Just PM me for pick up. If Kyle doesn't take it Bill, I'll let you know.
- KMcK
- Award Winner 1
- Posts: 2342
- Joined: Thu Oct 14, 2010 9:54 pm
- Name: Kyle
- Location: Halifax, Nova Soctia
Re: Barley "Barely" crusher
Okay, I'll pm John. If it doesn't work out for me I'll pass it on to Bill.
McKeggerator:
- no beer
- John G
- Award Winner 2
- Posts: 651
- Joined: Fri Sep 24, 2010 4:34 pm
- Name: John
- Location: North End Halifax
Re: Barley "Barely" crusher
This is no longer available - Picked up and hopefully still gets some use!
Who is online
Users browsing this forum: No registered users and 18 guests