Page 1 of 1
CO2 inflator
Posted: Thu Jul 10, 2014 8:18 am
by GAM
http://www.princessauto.com/pal/en//854 ... ign=hosted" onclick="window.open(this.href);return false;
Any way to alter this for a keg despencing system?
Sandy
Re: CO2 inflator
Posted: Thu Jul 10, 2014 10:23 am
by sucanushie
You can get something like this...
chargerconnectorcombo.jpg
Re: CO2 inflator
Posted: Thu Jul 10, 2014 10:44 am
by GAM
I was hoping for cheep and dirty.
Sandy
Re: CO2 inflator
Posted: Thu Jul 10, 2014 12:17 pm
by RubberToe
Sure, use some tubing and clamps to bridge a ball lock connector's hose barb to a tire valve stem. Charge the keg with the Princess Auto device like it's a tire.
Re: CO2 inflator
Posted: Thu Jul 10, 2014 3:07 pm
by GAM
Any experance Rob, or you can but.....
Sandy
Re: CO2 inflator
Posted: Thu Jul 10, 2014 4:21 pm
by RubberToe
Is that even English?
Re: CO2 inflator
Posted: Thu Jul 10, 2014 4:43 pm
by GuingesRock
It's English Rob. I thought Sandy's wondering if you have done anything like this before and if you had any comments like ...
You can do it but ...you could blow yourself up, etc.
That might be too much pressure for tubing and hose clamps. There's no regulator.
Re: CO2 inflator
Posted: Thu Jul 10, 2014 5:41 pm
by jacinthebox
sucanushie wrote:You can get something like this...
chargerconnectorcombo.jpg
Dave sells these for $24.99
Re: CO2 inflator
Posted: Fri Jul 11, 2014 8:25 am
by GAM
RubberToe wrote:Is that even English?
Ya can and but in the same sentence.
Sandy
Re: CO2 inflator
Posted: Sun Jul 13, 2014 10:08 am
by Keith
I've looked at these but at $3 per cartridge it can become rather expensive considering 3 cartridges to empty a keg.