Electric brew setup

Talk about your equipment builds/modifications here
Post Reply
User avatar
GAM
Verified User
Verified User
Posts: 5402
Joined: Wed May 18, 2011 2:50 pm
Name: Sandy MacNeil
Location: North End HFX

Electric brew setup

Post by GAM » Sun Feb 14, 2021 9:54 am

I have "fixed" a "burnt out" Grain Father controller. I want to use the 120v controller to operate a 220v element. I have all the parts but the relay (120v - 220v) and want someone qualified or brave enough to help "design" the control circuit.

I am willing to pay cash or trade brewing gear or guitar stuff.

Sandy

User avatar
GAM
Verified User
Verified User
Posts: 5402
Joined: Wed May 18, 2011 2:50 pm
Name: Sandy MacNeil
Location: North End HFX

Re: Electric brew setup

Post by GAM » Thu Feb 25, 2021 1:18 pm

I am looking for SSRs for the new build. What are electric brewers using and what source?

S

Jamveino
Verified User
Verified User
Posts: 82
Joined: Fri Nov 08, 2019 9:16 am
Name: James Veinot
Location: Kentville

Re: Electric brew setup

Post by Jamveino » Fri Feb 26, 2021 9:39 am

Inkbird Heat Sink SSR Solid State Relay For Temperature Controller Accessories 40A https://www.amazon.ca/dp/B06WLNHPWK/ref ... UTF8&psc=1

These are the ones I used in my 1 PID control box.

Jamveino
Verified User
Verified User
Posts: 82
Joined: Fri Nov 08, 2019 9:16 am
Name: James Veinot
Location: Kentville

Re: Electric brew setup

Post by Jamveino » Fri Feb 26, 2021 9:41 am

Image
You do not have the required permissions to view the files attached to this post.

BrodVictor
Registered User
Registered User
Posts: 1
Joined: Mon Apr 26, 2021 4:46 am
Name: BrodVictor

Re: Electric brew setup

Post by BrodVictor » Mon Apr 26, 2021 5:14 am

Hi...in my case I'm additionally on a mission of consistency. I measure everything from factory hole (pound repeatability), siphon yield valve hole (stream repeatability), crush thickness, power contribution for squash, power contribution for bubble, fermenter temp settings, and whatever else I can handle.

I view at fermenting not as one constant cycle, but rather as individual errands that have control and choice focuses. I arrangement and play out those means a similar way each an ideal opportunity to endeavor to arrive at consistency.

pcb fabrication and assembly

Post Reply

Return to “DIY - Do It Yourself”

Who is online

Users browsing this forum: No registered users and 12 guests