Crusher cabinet
-
- Registered User
- Posts: 14
- Joined: Tue Feb 21, 2017 9:44 am
- Name: Dean
Crusher cabinet
Here is my grain crusher bolted to a cabinet. I plan to shine it up a bit and dedicate a motor. Right now I use a drill. Quite tedious.
You do not have the required permissions to view the files attached to this post.
-
- Registered User
- Posts: 11
- Joined: Mon Oct 01, 2018 8:21 pm
- Name: Gary Robitaille
Re: Crusher cabinet
I did the same thing..
Zip tied the trigger tight, I have a corded drill that I plug into an outlet I installed on the side, controlled by a switch. And the box is plugged in… so I fill the hopper, flick the switch… keep filling it and when all the grain is in, I just wait for it to be crushed and shut the switch off!
Zip tied the trigger tight, I have a corded drill that I plug into an outlet I installed on the side, controlled by a switch. And the box is plugged in… so I fill the hopper, flick the switch… keep filling it and when all the grain is in, I just wait for it to be crushed and shut the switch off!
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 7 guests