Page 1 of 1
co2 regulator pressure relief
Posted: Wed Apr 16, 2014 5:21 pm
by denislemieux
My CO2 regulator is blowing off constantly, as soon as I turn on the tank the pressure relief blows off and no gas gets through the reg. It was working fine, I got my tank refilled, and now it doesn't work at all. Regulator is only about 2 months old. Anyone have any ideas?
Re: co2 regulator pressure relief
Posted: Wed Apr 16, 2014 5:25 pm
by AllanMar
When you first turn it on does the secondary gauge climb before it blows? (around 50-60psi?)
Re: co2 regulator pressure relief
Posted: Wed Apr 16, 2014 5:30 pm
by denislemieux
Apparently all I had to do was post to here and it is fixed. I went to verify whether it was reading, and now it is not blowing off.
Originally I had the pressure turned all the way down to my serving pressure mark (9psi) and it was blowing at that setting, but I did not confirm the reading on the gauge. I had disconnected the regulator, and went back to reconnect it to test. it read 9 PSI and didn't blow. I then turned it up to 30 and confirmed it still didn't blow.
So hopefully it is all good now.