Wort Chiller
-
- Registered User
- Posts: 7
- Joined: Fri Aug 02, 2013 9:23 am
Wort Chiller
I am a beginner and looking to buy a wort chiller. I have no abilities to make one. I have just started all grain recipes and the ice bath took far too long! I am not 100% on what size would be adequate - I have a 15 gallon pot, but currently making 23 litre batches. Any thoughts on best size, type and place to buy would be much appreciated.
- bluenose
- Verified User
- Posts: 1984
- Joined: Tue Dec 20, 2011 8:49 pm
- Location: New Glasgow
Re: Wort Chiller
I got mine here:
http://www.nybrewsupply.com/beer-home-b ... llers.html
I bought the 1/2" x 50' Copper Wort Chiller with Garden Hose Fittings
Total cost to my door was $144
Others may have done better
http://www.nybrewsupply.com/beer-home-b ... llers.html
I bought the 1/2" x 50' Copper Wort Chiller with Garden Hose Fittings
Total cost to my door was $144
Others may have done better
This is my signature. There are many like it, but this one is mine.
- bluenose
- Verified User
- Posts: 1984
- Joined: Tue Dec 20, 2011 8:49 pm
- Location: New Glasgow
Re: Wort Chiller
I would add that you won't need one this big if you're only going 5-6 gallon batches. If you are go with the 25' one as the 50' doesn't all fit in the boil
This is my signature. There are many like it, but this one is mine.
- dexter
- Verified User
- Posts: 994
- Joined: Fri Oct 28, 2011 11:59 am
- Name: Phil
- Location: Halifax
Re: Wort Chiller
they are super easy to make and can cost very little. All you really need is some copper tubing ( the longer and thicker the faster it cools the wort) that is bendable and some hose fittings. Noble grape sells ready to go ones I assume.
- pet lion
- Verified User
- Posts: 751
- Joined: Sun Jul 10, 2011 4:42 pm
- Name: Peter
- Location: Halifax peninsula
Re: Wort Chiller
Yep!dexter wrote: Noble grape sells ready to go ones I assume.
http://noblegrape.ca/?othercategory=brewequip" onclick="window.open(this.href);return false;
https://www.facebook.com/tidehousebrewingcompany" onclick="window.open(this.href);return false;
- GAM
- Verified User
- Posts: 5409
- Joined: Wed May 18, 2011 2:50 pm
- Name: Sandy MacNeil
- Location: North End HFX
Re: Wort Chiller
Unless you are disabled and badly so, this is a very easy build. get something round (corny/paint can etc) roll 25'-50' (25 is enough) neatly around leaving the ends over the height of your pot. Bend (pipe bender is cheep) the tube out over what will be the side of your pot. Clamp, solder or crimp on your hose fittings and test for leaks.
If your in town I can help you out.
Sandy
If your in town I can help you out.
Sandy
Who is online
Users browsing this forum: No registered users and 1 guest