Ball Lock Connector O-ring?

[AllanMar]

Anyone know where I can get the flat oring that goes inside of a ball lock connector?

I've got a couple that I damaged putting back together too quickly (threads caught the oring). Seems like a waste to get a new connector.

[chalmers]

McMaster-Carr had been a good source of keg orings, might be good in this case as well. Do you have dimensions?

I'd be up for several of these as well, if we do a group buy.

[AllanMar]

After doing some more googling I found people using the following silicone ones:
9396K18 (standard)
5233T37 (metric)
These aren't the squared side ones like the original, although people seem to have success with them.

I don't have a mcmaster account though.
Morebeer seems to carry them at $0.50ea, shipping is $31 though...
http://morebeer.com/products/keg-ball-l ... asket.html" onclick="window.open(this.href);return false;

[GAM]

Wrap the shit out of it with Teflon tape.

Contact Dave and see what he can get.

Sandy

[chalmers]

We've done McMaster group buys previously, as several folks on here have accounts (I'm not one of them, unfortunately). I can see if one of them wouldn't mind doing that, when they have time. A pack of 50 of the 9396K18 is under $10, and would be a lifetime supply for five of us, I imagine.

[GAM]

http://www.dresselbrew.com/Keg_Info.htm" onclick="window.open(this.href);return false;

Just looked this up. 9/16 x 7/16 x 1/16.

You could try Fastenall or Akland Granger and see if they can supply some. I'd take a few just in case.

Sandy